Monitoring and remote control facilities also require auxiliary elements such as antennas, cables, power supplies, batteries, adaptors, etc., which, although they are accessories, are no less important in the final result of the project. This section includes the more typical accessories, please consult our technical department so they may help you choose the most suitable for your project.

SATEL offers a wide range of auxiliary equipment and accessories for SATELLINE radio modems. Please contact us to receive more information about antennas, cables, sealed housing, power supplies and anything regarding radio-operated remote control.

Mast-mounted antennas

CAB2

CAB2 antenna

Dipole array with a bidirectional configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 6 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAB2 Manual

CAB4

CAB4 antenna

Dipole array with a bidirectional configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 9 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAB4 Manual

CAC2

CAC2 antenna

Dipole array with a displaced collinear configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 7 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAC2 Manual

CAC4

CAC4 antenna

Dipole array with a displaced collinear configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 10 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAC4 Manual

CAC

CAC antenna

Dipole array with a displaced collinear configuration.

  • Impedance: 50 ohm
  • Gain: 4 dBi
  • Connection: N-female/TNC-female
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAC Manual

CAE2

CAE2 antenna

Dipole array with an omnidirectional configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 5 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAE2 Manual

CAE2

CAE2 antenna

Dipole array with an omnidirectional configuration.

  • Selectable frequency: between 135 MHz and 475 MHz
  • Impedance: 50 ohm
  • Gain: 8 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAE4 Manual

CAY

CAY antenna

Dipole array with an omnidirectional configuration.

  • Impedance: 50 ohm
  • Gain: 6 dBi
  • Connection: N-female/TNC-female
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAY Manual

CAY+

CAY+ antenna

  • Impedance: 50 ohm
  • Gain: 8 dBi
  • Connection: N-female/TNC-female
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAY+ Manual

CAY++

CAY++ antenna

  • Impedance: 50 ohm
  • Gain: 10 dBi
  • Connection: N-female/TNC-female
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAY++ Manual

CAY+++

CAY+++ antenna

Array of directional Yagi antennas.

  • Selectable frequency: between 326 MHz and 960 MHz
  • Impedance: 50 ohm
  • Gain: 11 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAY+++ Manual

CAY++++

CAY++++ antenna

Array of directional Yagi antennas.

  • Selectable frequency: between 326 MHz and 960 MHz
  • Impedance: 50 ohm
  • Gain: 12 dBi
  • Polarisation: Vertical
  • Connection: N-female/TNC-female
  • VSWR: < 1.5
  • Temperature: -40 / +80 ºC
  • IP: 67

Additional documents

CAY++++ Manual

Adapters

Antenna adapters

Interface adapters for radio modems

We are ready to meet your needs with the following solutions:

  • NARS-1F with D15 male / D9 female connectors, a 650 mA fuse, power cables and a programming switch.
  • NARS-1F-4A similar to the NARS-1F but with a 4 A fuse (for use with Epic).
  • NARS-2 with D15 male connectors, a 650 mA fuse and an RS-422/485 adapter.
  • NARS-2-4A similar to the NARS-2 but with a 4 A fuse (for use with Epic).

Direct connection antennas

Direct connection antennas

We can supply the following types of antenna:

  • Half-wave antennas to cover short distances at frequencies between 400 and 470 MHz and at 869 MHz (Satelline-1870 radio modems).
  • Quarter-wave antennas to cover short distances at frequencies between 400 and 470 MHz and at 869 MHz (Satelline-3AS 869 radio modems).
  • Helical antennas to cover short distances at frequencies between 400 and 470 MHz.
  • Omnidirectional antennas to cover long distances at frequencies between 380 and 470 MHz (Satelline-3AS 869).
  • Directional antennas to cover long distances at frequencies between 380 and 470 MHz (Satelline-3AS 869).

RF and Interface Cables

Interface cables

RF and interface cables for use with Satelline radio modems.

We can supply you with the following RF cables:

  • CRF-1 RG58, 1 metre long and with TNC male / TNC female connectors.
  • CRF-5F RG58, 5 metres long with TNC male / TNC female connectors or connection CRF-5M with TNC male / TNC male connectors.
  • CRF-15 RG58, 15 metres long with right angle TNC female / TNC male connectors.
  • RG213 low-loss cable available in lengths between 1 and 20 metres, with TNC or N connectors.
  • AIRCIM+ low-loss cable available in lengths of more than 20 metres, with N connectors.

We can also supply the following interfaces:

  • CRS-1M, 1 m long with D15 / D25 male or CRS-1F female connectors, supplied with power cables.
  • CRS-2M, 2 m long with D15 / D25 male or CRS-1F female connectors, supplied with power cables.
  • CRS-PB, 2 m long with D15 / D25 male connectors for interface RS485, supplied with power cables.
  • CRS-18F, 1.5 m long, features PROG and SHDN wires with DIN4165-16 / D9 female connectors for the Satelline-1870, supplied with power cables.
  • CRS-18IF, 40 cm long, with DIN4165-16 / D15 female connectors for the Satelline-1870 and for the I-LINK 100.
  • CRS-9, 1 or 2 m long, with D9 male / D9 female connectors.
  • CRS-TSU, 50 cm or 2 m long, with D15 female connectors for use with the Satelline-2ASxE, 3AS or Epic, and for the I-LINK or TSU.